husqvarna carburetor adjustment

husqvarna carburetor adjustment in BROOKLYN

husqvarna carburetor adjustment BROOKLYN

husqvarna carburetor adjustment BROOKLYN.If set too low, the saw will die.
If set too high the chain will run.
Adjust this screw too rich and the chainsaw will blubber and die at idle speed.
Adjust this screw too lean and the engine will starve.
The saw will race or surge.
An extremely lean adjustment will also cause the engine to die.
Then turn counterclockwise one quarter of a turn.
With your poulan chainsaw idling turn the low speed jet until it starts to stall.
Then turn screw l the opposite way until it starts to stall.
Then put it in between the two stall points.
The high speed jet is a little harder.
Adjust it the same, but you want it as far counter clockwise as you can run it, and still have power in the cut.
If you run the saw and it lacks power in the cut, crank it in just a little and keep trying it.
Of course adjust the idle so it will run without the chain moving.
Then turn screw back one quarter turn and check that engine still accelerates smoothly when you open the throttle.
Poulan chainsaw carburetor adjustment settings tuneup is that easy.
What could it be worth?
Just have fun with it.
Ï»¿ so release anticlockwise one quarter of a release.
With your poulan chainsaw stagnating twist the low swiftness jet until it starts to stall.
So release cheat back one quarter release and check that engine still accelerates smoothly when you open the throttle.
Ï»¿ with your poulan chainsaw stagnating twist the low swiftness jet until it starts to stall.
So release cheat back one quarter release and check that engine still accelerates smoothly when you open the throttle.
Ï»¿ so release cheat back one quarter release and check that engine still accelerates smoothly when you open the throttle.. husqvarna carburetor adjustment

Husqvarna 3120XP Carb A... (4:01:46)
17,003 views
""